Spoiler: show
Materials used- Milliput (an epoxy putty), balsa wood, PVA glue, wire, clay, card, Mounting Board and Acrylic paint.
Spoiler: show
Tiny little Munny version of Wander, made from Milliput, glue and acrylic paint.
Spoiler: show
Base made from Mounting board, balsa wood, card and acrylic paint.
Spoiler: show
The fur is Milliput which I worked into with a wet cocktail stick while it was drying. The platform are made from balsa wood, glue and Milliput.
Spoiler: show
All the details on the body and arms where made from Milliput. The stone pattern on the body and mask was done with an airbrush.
Spoiler: show
I made a paper mache mould of the head and built the mask up on that. It was built up with careful sculpting and sandpaper.
Spoiler: show
The Munny came with a Pin-wheel accessory that I turned into the club. I took off the pin-wheel and glued pieces of balsa wood around it and carved it into the shape I wanted with a scapel. The details were made with thin pieces of balsa wood and some Milliput.













That's certainly a piece that will sell. It looks really professional.

