Sorry for the downtime, welcome back!!

Needles And Their Sizes

User avatar
amphibious
Rank 2 - Fire Mario
Rank 2 - Fire Mario
Posts: 32
Joined: Sun Feb 26, 2012 12:00 pm

Re: Needles And Their Sizes

Post by amphibious »

Ah, so I am apparently using a 24. That's appropriate for the 14 count I have been using, so I must have known what I was doing at the time I bought them :confused:

But I think I might try a thinner one... that must be really useful for when you use more strands as well.

evilcarrot
Rank 3 - Star Mario
Rank 3 - Star Mario
Posts: 85
Joined: Thu Jan 19, 2012 9:40 am

Re: Needles And Their Sizes

Post by evilcarrot »

I find that I break the eyes on thin tapestry needles easily, mainly when I'm trying to wedge the thing under some stitches in the back. The tapestry needles also seem more bendy than embroidery needles. If I can think of a good way to blunt the tips of embroidery needles, I'd actually prefer them due to the smaller eyes and less breakage. Maybe running the tip across the brick on my fireplace would do it?

Now I want short, or "petite" needles... I've always thought they'd make much more sense for cross stitching but could never find any. Now that I know they exist, I'm going searching!

User avatar
Lord Libidan
Rank 10 - Cape Mario
Rank 10 - Cape Mario
Posts: 1176
Joined: Wed Apr 07, 2010 1:44 am
Contact:

Re: Needles And Their Sizes

Post by Lord Libidan »

evilcarrot wrote:If I can think of a good way to blunt the tips of embroidery needles, I'd actually prefer them due to the smaller eyes and less breakage. Maybe running the tip across the brick on my fireplace would do it?!
I wouldn't suggest it. You'd make it blunt, but you'd also make little ridges that would snag on the thread and cloth. I do believe you can get blunt embroidery needles though. You may have to search for them, but I have a few somewhere...
Image

User avatar
Yurtle
Rank 9 - Hammer Mario
Rank 9 - Hammer Mario
Posts: 767
Joined: Mon Mar 08, 2010 4:48 pm
Contact:

Re: Needles And Their Sizes

Post by Yurtle »

I thought I would also note here that you should keep the needles that you're using for metallic thread separate from the needles you're using for your normal DMC, and especially separate if you use silk floss. The metallic thread will make the inside of the eye on your needle very rough and will actually cause it to break ove time. If you're using regular floss on the same needle after using metal, you may find that your floss will break very easily where it goes through the eye.

sublimelmf
Rank 2 - Fire Mario
Rank 2 - Fire Mario
Posts: 34
Joined: Fri May 20, 2011 6:35 pm
Contact:

Re: Needles And Their Sizes

Post by sublimelmf »

Yurtle wrote:I thought I would also note here that you should keep the needles that you're using for metallic thread separate from the needles you're using for your normal DMC, and especially separate if you use silk floss. The metallic thread will make the inside of the eye on your needle very rough and will actually cause it to break ove time. If you're using regular floss on the same needle after using metal, you may find that your floss will break very easily where it goes through the eye.

Interesting... I recently used metallic thread for the first time and then noticed the eyes on my needles were breaking when I went back to regular floss, but didn't know the two were connected. I thought my needle was just too thin or something. Thanks for the tip!

User avatar
LinkIsMyHomeboy
Rank 9 - Hammer Mario
Rank 9 - Hammer Mario
Posts: 766
Joined: Tue Dec 29, 2009 8:47 pm

Re: Needles And Their Sizes

Post by LinkIsMyHomeboy »

I guess I've gotten lucky because I have never experienced any of these problems. I don't find my needles bending, breaking, oxidizing or flaking off. I've used the same needle to go back and forth between regular floss and metallic floss and never had any issues with breakage. The only problem I have is losing them. I have a poor habit of putting my needles in my shirt or pants when I'm working on a project and then forget about them and they get lost somewhere. Luckily, no feet have found them.

User avatar
monkeypeaches
Rank 5 - Frog Mario
Rank 5 - Frog Mario
Posts: 182
Joined: Sat Jan 05, 2013 6:06 pm
Contact:

Re: Needles And Their Sizes

Post by monkeypeaches »

Lord Libidan wrote:
starrley wrote:On another note, I believe that needle sizes may be different in the US than the UK. My embroidery needles range in size from 5 to 10. Or am I missing something... (that is entirely possible! :grin: )
Yes. Cross stitch needles are tapastry needles, where as embroidery needles are sharper, have a smaller eye, they have different numbering. I'm not sure what size is best or anything though...
As Libidan mentioned, embroidery needles are sharper and have a smaller eye than tapastry needles. Most people use tapastry needles for their cross stitching, but if you have never tried using embroidery needles, I would highly recommend buying a pack to see which you prefer. I actually love using embroidery needles instead because their sharp end seems to avoid snagging on the threads of previous stitches as much. Try them and see if they help!
My blog is a mishmash of my crafty/nerdy lollygagging
http://whimsydaisical.blogspot.com/

Anime I'm stitching along to: Sailor Moon R or Bleach

Image Image Image

hadaad
Rank 0 - Little Mario
Rank 0 - Little Mario
Posts: 8
Joined: Wed Nov 30, 2016 12:44 pm

Re: Needles And Their Sizes

Post by hadaad »

Resurrecting an old thread, I know, but I was wondering what needles people have had success with on 28 count evenweave.

User avatar
blackmageheart
Rank 12 - Yoshi Mario
Rank 12 - Yoshi Mario
Posts: 5695
Joined: Wed Apr 08, 2009 5:47 am
Contact:

Re: Needles And Their Sizes

Post by blackmageheart »

hadaad wrote:Resurrecting an old thread, I know, but I was wondering what needles people have had success with on 28 count evenweave.
I tend to use a 26 for most counts because I like to, but that's just me. Depends what you are stitching on the 28 count. I've heard it recommended that you use a 24, I believe, although if you're doing tiny things or fractionals you may want to use something a bit smaller (like my 26 or even a 28.)
Like anything in this craft, I believe it's really up to you - what you like and what you feel comfortable using! :)
RMDC wrote:...I've been stitching at an estimated rate of almost a full BMH per day...

hadaad
Rank 0 - Little Mario
Rank 0 - Little Mario
Posts: 8
Joined: Wed Nov 30, 2016 12:44 pm

Re: Needles And Their Sizes

Post by hadaad »

blackmageheart wrote: I tend to use a 26 for most counts because I like to, but that's just me. Depends what you are stitching on the 28 count. I've heard it recommended that you use a 24, I believe, although if you're doing tiny things or fractionals you may want to use something a bit smaller (like my 26 or even a 28.)
Like anything in this craft, I believe it's really up to you - what you like and what you feel comfortable using! :)
Do people really do half-stitches on 28-count over one? That's hardcore right there.

Post Reply